Request a Quote ↗
← Application Areas

Valve Considerations for Urban Sewer Pipelines

Urban sewer networks combine gravity sewers, lift stations, and pressurized force mains.

Urban Sewer Pipelines

Urban sewer networks combine gravity sewers, lift stations, and pressurized force mains. At the pumping and treatment interfaces, valves must work with flows that may contain grit, rags, grease, and other solids. A clean-water valve description therefore does not establish suitability for raw sewage. The right arrangement gives crews a safe way to isolate equipment while preserving the system's capacity to convey wastewater.

Identify the service at each location

A wet-well pump discharge, force-main bypass, screened wastewater line, and treated-effluent line can have very different solids content and pressure. The specification should record the media, particle size, expected fouling, flow direction, cycling frequency, and required shutoff. Depending on duty, the design may call for solids-handling isolation equipment, a check valve, air-management devices, or a combination. Each has a separate function, and the check-valve closing behavior should be reviewed for water-hammer risk.

Keep the network maintainable

Valve chambers and stations need enough space to operate, inspect, and remove equipment. Provide means to drain and flush isolated sections without uncontrolled releases. Bypass routes should be labelled and included in written procedures so a pump can be serviced or a force main repaired without creating an avoidable overflow. Air-release and air/vacuum devices, where specified by the hydraulic design, require inspection and documented maintenance; malfunction can reduce capacity or contribute to overflow or damaging pressure conditions.

Choose materials for the actual environment

Wastewater exposure, cleaning chemicals, and the atmosphere in chambers may affect body, seat, coating, and actuator materials. Check the pressure class against pump shutoff pressure and transient conditions, not just normal running pressure. Functional testing should include realistic operating positions and accessibility for maintenance staff.

Pango can assess available isolation products for identified wastewater or treated-effluent duties after the media and product data are reviewed.